Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stihl SP-KM
Summary of Contents for Stihl SP-KM
- Page 1 STIHL SP-KM Instruction Manual...
-
Page 3: Table Of Contents
English Contents Dear Customer, KombiSystem Guide to Using this Manual Thank you for choosing a quality engineered STIHL product. Safety Precautions and Working Techniques It has been built using modern Using the Unit production techniques and comprehensive quality assurance. Approved KombiEngines... -
Page 4: Kombisystem
Only mount rakes and tines or time and keep them in a safe place for accessories that are explicitly approved future reference. for this power tool by STIHL or are technically identical. If you have any questions in this respect, consult a servicing dealer. - Page 5 – tines pointing to the rear. To reduce the risk of eye STIHL recommends the use of original injuries, wear close-fit - Do not touch hot parts of the machine STIHL replacement parts and ting safety glasses in since burn injury will result.
- Page 6 / stop switch/button to STOP or 0. idle speed setting regularly. If the To reduce the risk of accidents, take a attachment still moves when the engine break in good time to avoid tiredness or is idling, have your dealer check your exhaustion. SP-KM...
- Page 7 Never touch the rakes or tines while the superficial cracks. engine is running. If the rakes or tines STIHL recommends the use of genuine To reduce the risk of injury, shut off the become jammed by thick branches or STIHL replacement parts. They are engine before changing the tines.
-
Page 8: Using The Unit
Always shut off the engine before increased vibration – see "Vibrations". leaving the unit unattended. SP-KM... -
Page 9: Approved Kombiengines
English Approved KombiEngines Assembling the Unit Only use KombiEngines supplied by STIHL or expressly approved by STIHL for use with the attachment. This KombiTool may be operated only in combination with the following KombiEngines/Motors: STIHL KM 55 R, KM 56 R, KM 85 R KM 90 R, KM 94 R, KM 100 R, KM 110 R... - Page 10 – do not remove them. Line up the center of the gearhead with the lug (4) on the drive tube – the STIHL logo facing up. Tighten down the clamp screws on the gearhead firmly. Screw the tines (1) into the two Installing the tines rakes (2) as far as stop –...
-
Page 11: Mounting The Kombitool
Use the combination wrench (3) to Removing the KombiTool width below your right hip. tighten down the tine (1) firmly by turning it another 30° to 40°. Reverse the above sequence to Remove the combination wrench remove the drive tube. from the tine. SP-KM... -
Page 12: Starting / Stopping The Engine
NOTICE shoulders. Attach the carabiner (1) to the Do not stand or kneel on the drive tube. carrying ring (2) on the drive tube – hold the carrying ring steady. SP-KM... -
Page 13: Storing The Machine
The starting procedure is now as described in the instruction manual of the KombiEngine or basic power tool you are using. Stopping the Engine See KombiEngine or basic power tool instruction manual. SP-KM... - Page 14 Unscrew the tine from the rake (4). If you have difficulty fitting the protective tubes, contact your local dealer for assistance. STIHL recommends a STIHL servicing dealer. Use the combination wrench (2) to tighten down the tine (3) firmly by turning it another 30°...
-
Page 15: Maintenance And Care
English STIHL recommends that you have Maintenance and Care Minimize Wear and Avoid servicing and repair work carried out Damage exclusively by an authorized STIHL servicing dealer. STIHL dealers are The following intervals apply to normal Observing the instructions in this manual regularly given the opportunity to attend operating conditions only. -
Page 16: Main Parts
English Main Parts Tine Rake Forkhead Gearbox Drive tube Coupling sleeve Loop handle Integral carrying ring Adjustable carrying ring 10 KombiEngine SP-KM... -
Page 17: Specifications
Noise and Vibration Data KM 85 R with loop handle: 4.3 m/s 6.3 m/s Noise and vibration data measurements KM 90 R with on power tools with the SP-KM loop handle: 4.9 m/s 5.4 m/s KombiTool include idling and rated KM 94 R with maximum speed in a ratio of 1:6. -
Page 18: Maintenance And Repairs
Directive 2006/42/EC and has been replacement parts which have been accessories and packaging to an developed and manufactured in approved by STIHL for this power tool or approved disposal site for environment- compliance with the following standards are technically identical. Only use high- friendly recycling. - Page 19 English SP-KM...
- Page 20 0458-417-0121-A englisch www.stihl.com *04584170121A* 0458-417-0121-A...
Need help?
Do you have a question about the SP-KM and is the answer not in the manual?
Questions and answers