Building In The New Picture Tubes; Procedure 4; Image 8 The Correct Panels (1,2,3) By R-G-B; Image 9 Position Correction With Screws - Barco R7628162K Installation Manual

Building in the new picture tubes

Procedure 4

- Replacing 1 picture tube: follow the next procedure:
Image 8 The
correct panels
(1,2,3) by r-g-b
Image 9 Position
correction with
screws
BARCO ——————————————————— 9
Step Action
1 Fix the mounting panels on the picture tube
2 slide in the new picture tube and reconnect the end stage
3 fix the picture tube block on the lower panel and top panel
NOTE: If necessary you can correct the position of the
mounting panel with respect to the picture tube block by
loosening the screws in the front (4 screws are supplied)
see also the numbers on the panels
NOTE: difference between picture tubes:
by colored label : red ,green & blue
by last digit of the art. No. red=2, green=5, blue=6
B G
3 1 2 1 2
R
3
————————————— Projection Systems
Image
8,9
9