Replacement Of 9” Fixed Pictures Tubes With Adjustable Tubes; What Has To Be Done; Procedure 2; Image 1 - Barco R7628162K Installation Manual

Replacement of 9” fixed pictures tubes with adjustable
tubes.
What has to be Replacement of the 9” fixed picture tubes with the adjustable picture tubes
done applicable on the following kits:
R7624302K /5K /6K
R7626412K /5K /6K
R7624312K /5K /6K
R762142K /5K /6K

Procedure 2

Follow the next procedure:

Image 1

BARCO ——————————————————— 6
Step Action
1 Place the device with its bottom on the floor: the picture
tubes can not be replaced while the projector is mounted
on the ceiling
2 Remove the top cover
3 Remove the protection cover panel (top side)/opening
4 Remove the Lenses
5 Remove the perforated protection panel (front side/14
screws)
Attention: for the 2 screws on the under side you have to
loosen the complete picture tube frame (2x5 screws) and
lift it up
Screws to loosen the picture tube frame
Picture tube frame fixing: the protection panel is not
remounted for the new picture tubes but replaced by
protection corner pieces (see 10)
Attention: Therefore 6 screws of the old protection panel
must be reused
————————————— Projection Systems
Image
4
123
5
123