Operation Mode; Manual Mode - eka KF 630 D UD Use And Instruction Manual

_ TECNOEKA Srl __________________________________________________________ use and instruction manual _
7. 7. 7. 7. How to use the control panel How to use the control panel
How to use the control panel How to use the control panel
Control Panel symbol legend: Control Panel symbol legend:
Control Panel symbol legend: Control Panel symbol legend:
Parameter on signal LED
1) 1) 1) 1)
Cooking parameter selection button
2) 2) 2) 2)
Step on signal LED
3) 3) 3) 3)
Cooking step selection button
4) 4) 4) 4)
Parameter display
5) 5) 5) 5)
8. Ignition 8. Ignition 8. Ignition 8. Ignition
The control panel (digital) automatically turns on as soon as the oven is electrically powered.
The lights in the cooking chamber turn on. "0.00" appears on the display to indicate time
(expressed in hours and minutes) and the time led turns on in the parameter field (symbol
The phase 1 led turns on in the "phase" field (set to receive cooking parameters).
9. Switch- - - - off 9. Switch 9. Switch 9. Switch off off off
The control panel automatically turns off10 minutes after the cooking cycle ends (in "manual"
mode or in "automatic" mode whether switched-off automatically or by pressing the
button) without any button being pressed.
The lights in the cooking chamber turn off, the display and operating function leds turn off.
Only the button led remains on.
To restart the control panel, simply press the

10. Operation mode

10. Operation mode 10. Operation mode 10. Operation mode
The cooking cycle can be run in "manual" or "programmed" mode which can be divided in 4
steps. TIME/TEMPERATURE/HUMIDITY cooking parameters can be set for each step.

MANUAL MODE

To select cooking parameters (TIME/TEMPERATURE/HUMIDITY), press the button
for the selected parameter turns on each time the button is pressed. At least cooking time and
temperature parameters must be set for the cooking cycle to start.
• To select cooking cycle steps (1 – 2 – 3 – 4), press the button
to the selected step turns on each time the button is pressed. The led relevant to the current
step blinks during the cooking cycle.
• To set or change the selected parameter, press buttons
Press button to increase the parameter. - Press button
_ page. 10 ________________________________________________________________________________________
3 3 3 3
1 1 1 1
4 4 4 4
2 2 2 2
6 6 6 6 7 7 7 7
5 5 5 5
Parameter value decrease button
6) 6) 6) 6)
Parameter value increase button
7) 7) 7) 7)
Cooking program select/save button
8) 8) 8) 8)
Manual humidifying button
9) 9) 9) 9)
START/STOP button
10) 10)
10) 10)
button.
to decrease the parameter.
8 8 8 8
1 1 1 1 0 0 0 0
9 9 9 9
the led relevant
.
).
the led