Summary of Contents for Copeland Furniture SoHo Bed
Page 1
Failure to do so would void the warranty. is delivered in four boxes. Unpack the bed parts onto a soft, level surface in the space where the bed is to be Your SoHo bed used. Lay out the headboard, side rails and footboard in their approximate locations.
Page 2
SoHo Bed - assembly instructions Step 1 Threaded Insert Threaded Rod x8 (pre-installed) Install all threaded rods into the threaded inserts (pre installed in the headboard and footboard) and hand tighten as far as possible. Step 2 Washer and Hex Nut x8 Slide a side rail onto the headboard using the dowel in the end of the rail and the threaded rod as a guide.
Page 3
SoHo Bed - assembly instructions Step 4 Platforms assemblies are to be positioned on the side rails as the illustration shows. Begin with one platform assembly closest to headboard and proceed to step 5 Side View of Assembled Side Rail, Platforms and Center Support Blocks...
Page 4
Important: Please Note: Beds must be disassembled before moving to avoid damage. Never attempt to move the bed while it is assembled. To care for and preserve the finish on your new Copeland Furniture piece, please keep the following recommendations in mind.
Need help?
Do you have a question about the SoHo Bed and is the answer not in the manual?
Questions and answers