Page 1
Instruction Manual Option Attachment "OPC-E2-ADP1" - Please read and ensure a proper understanding of this manual before installing, connecting (wiring), operating, or con- ducting maintenance and inspection of the interface option. - Improper handling might result in incorrect operation, a short life, or even a failure of this product as well as the motor.
Page 2
Thank you for purchasing the option attachment "OPC-E2-ADP1". The use of this option attachment allows the FRENIC-Ace series to be equipped with option cards (sold separately). 1. Product Check Please check the following before using the Attachment product. (4) Check the model on the nameplate and ensure that the product is the same as that ordered.
Page 3
Installation procedure [Example using option card OPC-DIO] Remove the bottom cover. Open the top cover. Step (2) details Press the indented locations (indicated release the lock, allowing the cover to be opened. Remove the touch panel. Pass the harness through to the inside of the attachment.
Page 4
If removing the attachment, always disconnect one side of the harness connector beforehand. Always connect the attachment ground wire to the inverter ground to ground the inverter also. Fuji Electric Co., Ltd. Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo, 141-0032, Japan...
Need help?
Do you have a question about the OPC-E2-ADP1 and is the answer not in the manual?
Questions and answers