Headset Operation; Belt Clip - VTech MI6820 User Manual

5.8 ghz digital spread spectrum accessory handset

Hide thumbs Also See for MI6820:

Table of Contents

Headset Operation

Your mi 6820 handset is equipped with a 2.5mm headset jack for use with an optional

accessory headset for handsfree conversations. If you choose to use the headset

option, you must obtain an optional accessory headset that is compatible with the mi 6820.

To purchase a headset, visit us on the web at www.vtechphones.com or call VTech

Customer Service at 1-800-595-9511, in Canada go to www.vtechcanada.com or call

1-800-267-7377.

Once you have a compatible 2.5mm headset, locate the headset jack on the mi 6820

handset. Connect the plug on the headset cord to the jack (under a small rubber flap) on

the cordless handset. The plug should fit securely. Do not force the connection.

NOTE:

•

Whenever a compatible headset is conn-

ected to the cordless handset, the micro-

phone on the handset will be muted. This

is done to limit the effect of background

noise.

•

When a compatible headset is connected

to the cordless handset, your speaker-

phone feature will be disabled. To use your

speakerphone feature, simply disconnect

the headset from the handset.

The mi 6820 is also equipped with a detach-

able belt clip. Align the pins on the inside edge

of the clip with the notches on the sides of the

handset. The belt clip should snap securely

into place. Do not force the connection.

Table of Contents

Ml 6820