Advertisement
- SLIDE BED 8' YELLOW - A6P00033
SLIDE ASSEMBLY
STEP 1
PLACE 'M77' SLIDE BRACE BOARD 1/4" FROM THE BOTTOM EDGE OF THE SLIDE BED. USING THE BOARD
AS A TEMPLATE, MARK WHERE THE PILOT HOLES WILL BE DRILLED. USE A 3/8" DRILL BIT TO DRILL THE
PILOT HOLES INTO THE SLIDE BED. ATTACH THE SLIDE BED SUPPORT BOARD USING THE HARDWARE
PROVIDED.
TIP: PREBENDING THE SLIDE ENDS WILL EASE ASSEMBLY.
M77 - SLIDE BRACE - W4L04711
5/8"x3 3/8"x14 1/4" (16x86x362)
27
BOLT WH
(2)
5/16x1/2
(2)
T-NUT 5/16
Advertisement
