Rapid Startup Wizard Configuration - HP ProLiant ML110 G1 User Manual

NOTE:
The default login for the WebUI is administrator and
the password is hpinvent. The WebUI uses the same
login as the local administrator's account or an account
with administrative privileges.
5.
Open Internet Explorer to launch the WebUI configuration application
(Rapid Startup) on the target storage server, as shown in
the WebUI does not launch, connect to the Local Host and log into
the WebUI.
6. Go to
procedures.
Rapid Startup Wizard configuration
This utility guides you through the configuration process.
Ensure that an Internet Explorer window is open and the WebUI is at the
Rapid Startup Wizard, as shown in
NOTE:
The Rapid Startup Wizard is the default page unless you complete the
wizard or select the checkbox next to the text that reads
this wizard as the default page
NOTE:
Some models require an additional step to configure Integrated
Lights-Out (iLO) settings.
Using the information from
1.
On the Rapid Startup Wizard screen, click Next to start wizard. There
may be a slight pause because the wizard gathers information about
the system and the population of the fields.
2. Configure the Date and Time Settings. Click Next to continue.
3.
Configure the Administrator Account settings. Click Next to continue.
4.
Configure the Alert E-mail settings. Click Next to continue.
5.
Configure the SNMP Settings. Click Next to continue.
26 Storage server startup
Rapid Startup Wizard configuration
Table
Figure 1.
.
6, fill in the windows that follow.
Figure
to complete the setup
Do not show
1. If