Rapid Startup Wizard Configuration; Procedure - HP ML110 G1 User Manual

Rapid Startup Wizard configuration

This utility guides you through the configuration process.
Ensure that an Internet Explorer window has been opened and the
WebUI is at the Rapid Startup Wizard as shown in
Figure 1
NOTE:
complete the wizard or select the checkbox next to the text that reads,
"Do not show this wizard as the default page."
NOTE:
Lights-Out (iLO) settings.

Procedure

Using the information from Table 4, fill in the screens that follow.
Click Next to start the Rapid Startup Wizard (There may be a slight
1.
pause because the wizard is gathering information about the system
and populating the fields.)
Configure the Date and Time Settings. Click Next to continue.
2.
Configure the Administrator Account settings. Click Next to continue.
3.
Configure the Alert E-mail settings. Click Next to continue.
4.
5. Configure the SNMP Settings. Click Next to continue.
6. Configure the Network Interface Information for both NICs. Click
Next to continue.
20 System Configuration
Rapid Startup wizard screen
The Rapid Startup Wizard will be the default page unless you
Some models require an additional step to configure Integrated
Figure 1.