Rapid Startup Wizard Configuration; Requirements; Procedure - HP StorageWorks 4000s - NAS Installation Manual

Rapid startup wizard configuration

This utility will guide you through the configuration process.

Requirements

Ensure that an Internet Explorer window has been opened and the
WebUI is at the Rapid Startup Wizard as shown in
Figure 4: Rapid Startup wizard screen
Note:
complete the wizard or select the checkbox next to the text that reads,
"Do not show this wizard as the default page."

Procedure

Using the information from
1. Select Next to start the Rapid Startup Wizard (There may be
a slight pause because the wizard is gathering information
about the system and populating the fields.)
2. Configure the Date and Time Settings. Select Next to
continue.
3. Configure the Administrator Account settings. Select Next to
continue.
NAS 4000s and 9000s Installation Guide
DRAFT
The Rapid Startup Wizard will be the default page unless you
HP Restricted
Table 2, fill in the screens that follow.
Figure 4.
27