Configuration Worksheet
Network Interfaces (to be completed for non-DHCP configurations)
Local area connection 1
IP address
Subnet mask
Default gateway
Local area connection 2
IP address
Subnet mask
Default gateway
iLO 2 settings
DNS server
WINS server
Server Name
Server name
Running the Rapid Startup Wizard
The Rapid Startup Wizard is only displayed during the initial setup process. This wizard guides you
through configuring the following system settings:
•
Date, time, and time zone
•
Administrator identity (user name and password)
•
Alert e-mail notification
•
Lights-Out 100 (LO100) / Integrated Lights-Out 2 (iLO 2) settings
•
Simple Network Management Protocol (SNMP) settings
•
Network interfaces
•
Server name
For more information about the configuration settings available in the Rapid Startup Wizard, click
Help to see the corresponding Rapid Startup Wizard online help topic.
A local area connection is automatically created for each network
adapter that is detected.
An Internet Protocol (IP) address is assigned to the server. If it is not
automatically assigned, enter the IP address that you want to assign
to this server.
A mask is used to determine what subnet an IP address belongs to.
The gateway in a network that the network adapter will use to access
all other networks.
Any additional local area connections can be renamed to prevent
confusion.
Same as above.
Same as above.
Same as above.
Change the host name, IP settings, and administrator settings.
A Domain Name System (DNS) server name is required to provide
for domain name to IP address resolution.
A Windows Internet Naming Service (WINS) server name is required
to determine the IP address associated with a particular network
computer.
Assign a unique name to the storage server. This name identifies the
storage server on the network.
HP ProLiant Storage Server
31