HP ProLiant ML110 G1 User Manual page 42

The drives are configured by default into three logical disks at the controller
level as described in
Table 8 100 series two-HDD configurations
Logical RAID level
disk
1
RAID 1
2
RAID 1
3 RAID 1
Logical RAID level
disk
1
RAID 1
2 RAID 1
3 RAID 1
1
The DL100 G2 (Workgroup) also is available in a four-drive configuration. See
section called "Four-HDD configurations"
When the primary OS has a failure such as system files becoming
corrupted, registry corrupted, or the system hangs during boot, the
system should be run from the secondary OS. To run the system from the
secondary OS:
1.
Power down the unit.
2.
Connect a monitor, keyboard, and mouse directly to the rear of the
unit.
3.
Power on the unit.
4. During boot up, select to use the secondary partition.
42
Default storage configurations
Table 8.
ML110 G2 (Express)
9 GB across physical drives
0, 1
9 GB across physical drives
1, 0
Remaining space across all
physical drives
DL100 G2 (Workgroup, 2 drives)
12 GB across physical drives
0, 1
12 GB across physical drives
0,1
Remaining space across all
physical drives
for configuration information.
Size/allocation
Size/allocation
Purpose
Primary OS
Secondary
OS
Data
1
Purpose
Primary OS
Secondary
OS
Data
the