Mains Water Connection; Notes On Connection To The Water Supply - Miele KFN 37692 iDE Operating And Installation Instructions

Mains water connection

Notes on connection to the
water supply
Connection to the mains water sup‐
ply should only be carried out by a
qualified and competent person.
Disconnect the appliance from the
mains electricity supply before con‐
necting it to the mains water supply.
Close the stopcock before connect‐
ing the water intake hose to the ice
cube maker.
The water quality must conform to
the requirements for drinking water
in the country the appliance is being
installed in.
This appliance meets the requirements
of IEC 61770 and EN 61770.
84
Connection to the household water
supply must comply with current na‐
tional and local safety regulations in
the country in which the appliance is
being installed.
All items used for connecting the ap‐
pliance to the mains water supply
must comply with current national
and local safety regulations in the
country in which the appliance is be‐
ing installed
The appliance is only suitable for
connection to a cold water supply,
which
– is connected directly to the fresh wa‐
ter supply, to guarantee circulation of
water throughout the system.
Avoid laying the water hose in such a
way that water can collect in it, as
this can affect the taste of the water
or the ice cubes.
– sustains operating pressure.
– complies with hygiene regulations.
The water pressure (flow rate) must be
between 1.5 and 6 bar.