SECO-LARM SD-993B-SS Installation Manual page 8

ELECTRIC SHEAR LOCK Installation Manual
For optional surface-mount bracket and U-bracket kits:
SD-993S-SB
Surface-mount bracket kit
SD-993S-UB
U-bracket (glass door) kit
Bracket kits for SD 993B SS Electric Shear Lock
FOR SURFACE MOUNTING (SD-993S-SB)
Surface-mount
(magnet and armature).
Use 2 x surface-mount brackets
Header
M6 x 45 screw
Blind Nut
Magnet
Assembly
Armature M6 x 45 screw
Assembly
Blind Nut
Surface
Metal
mount
Door
bracket
The magnet assembly is in
the bracket above the door,
and the armature assembly
is in the bracket on the door.
SD 993S SB includes:
2 x Surface mount brackets
4 x Aluminum trim plates
3 x Blind nuts
3 x Hex screws
1 x Blind nut assembly
WARRANTY:
This SECO LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the
original consumer customer. SECO LARM's obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or
if for any other reason SECO LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO LARM, and the purchaser's exclusive remedy, shall be limited to replacement or repair only, at SECO LARM's option. In no event shall SECO LARM be liable for any
special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else.
NOTICE :
The information and specifications printed in this manual are current at the time of publication. However, the SECO LARM policy is one of continual development and
improvement. For this reason, SECO LARM reserves the right to change specifications without notice. SECO LARM is also not responsible for misprints or typographical errors.
Copyright © 2006 SECO LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO LARM.
SECO-LARM U.S.A., Inc. EC .S . .,
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
Page 8
Flush mount (magnet).
Surface mount (door).
Use 1 x surface mount bracket
Header
Magnet
Assembly
2mm
M6 x 45 screw
Armature
Assembly
Blind Nut
Metal
Surface
mount
Door
bracket
The magnet assembly is flush to
the door frame or header, and
the armature assembly is in the
bracket on the door.
SD 993S UB includes:
2 x U brackets
8 x Aluminum spacers
4 x Hex screws
1 x Hex wrench
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
SD-993S-SB
SD-993S-UB
FOR GLASS DOOR MOUNTING (SD-993S-UB)
May require 1 or more SD 993S SB
and SD 993S UB bracket kits,
depending on the glass door
configuration.
2 x Surface
mount
brackets
Min. gap:
2mm
U bracket
Spacer
NOTES: One glass door with a glass frame illustrated above.
MiSD-993B-SScEmailb.pmd
SECO-LARM U.S.A., Inc.
Glass
frame
2 x U brackets
Min.
Clearance:
7mm
Glass
door
PITGW1