SECO-LARM SD-991A-D1Q Manual

Mini electric door strike

Features:

 Mini fail-secure electric door strike

 12VDC operation

 Includes no-cut and low-cut strike plates

 Door remains locked if power is lost

 Reversible non-handed design

SD-991A-D1Q

Mini Electric Door Strike

Manual

 Can be used with almost any cylindrical

door locking system

 Suitable for office-type applications

 Compatible with digital keypads, pushbutton

switches and other entry devices

Table of Contents

Do you have a question about the SD-991A-D1Q and is the answer not in the manual?

Page 1 SD-991A-D1Q Mini Electric Door Strike Manual Features:  Mini fail-secure electric door strike  Can be used with almost any cylindrical  12VDC operation door locking system  Includes no-cut and low-cut strike plates  Suitable for office-type applications  Door remains locked if power is lost ...
Page 2 SECO-LARM Mini Electric Door Strike Features:  Converts cylindrical lock sets into an electronic  Suitable for office-type applications access-controlled locking system  Reversible non-handed design fits either  Fail-secure operation – Door remains locked if right-hand or left-hand doors power to the strike is lost ...
Page 3 SECO-LARM Mini Electric Door Strike Installation: Fig. 1 For Timely interior door frames (see Fig. 1): ® The no-cut door strike should fit into the door strike cutout of Timely interior door frames without making any new cuts or screw holes. However, in rare cases because of how the door latch was installed, it may be necessary to cut out a small piece of the frame, or drill new screw holes.
Page 4 WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if...