Panelmount Installation - Aaeon AHP-1123 Manual

T o u c h P a n e l P C

2.1 Panelmount Installation

The display panel can be mounted into the wall. You will need the
screws along with the mounting brackets, which be packed in the
accessory box. Follow the steps below:
Before you start to follow the instructions, please place the
display panel into the wall. See the following illustration on the
left.
STEP 1.
Bracket
STEP 1.
STEP 1.
Step 1:
Bracket
Bracket
STEP 1.
Bracket
STEP 2.Mount Bracket
STEP 2.Mount Bracket
STEP 2.Mount Bracket
Step 2:
STEP 2.Mount Bracket
STEP 3.Mount Bracket
STEP 3.Mount Bracket
STEP 3.Mount Bracket
Step 3: Move the mounting set to the narrow gauge and fix
STEP 3.Mount Bracket
it with screws.
STEP 4.
STEP 4.
STEP 4.
STEP 4.
You've completed the preliminary when the
Step 4:
mounting set is tightened. Next, repeat the steps and tighten all
mounting set around the monitor until the monitor is firmly
mounting on the wall.
Chapter 2 Quick Installation Guide
螺絲套上彈簧固定在
Mount
螺絲套上彈簧固定在
Mount
螺絲套上彈簧固定在
Mount
Place the mounting brackets and plug the screw.
螺絲套上彈簧固定在
Mount
裝在凸型孔內
裝在凸型孔內
裝在凸型孔內
Aim the mounting set at the hole on the monitor.
裝在凸型孔內
往凸型方向前進
往凸型方向前進
往凸型方向前進
往凸型方向前進
上緊螺絲固定在牆上
上緊螺絲固定在牆上
上緊螺絲固定在牆上
上緊螺絲固定在牆上
2 - 2
A H P - 1 1 2 3