Worx WX314 Safety And Operating Manual page 9

D
E
F
G
Impact drill
4. OPERATING THE ON/Off SWITCH (See fig. D)
Switching On and Off
Depress the switch to start the tool and release it to
stop your tool.
Continuous use
Depress On/off Switch(5) then lock-on button, release
On/off Switch first and lock-on button second. Your
switch is now locked on for continuous use. To switch
off your tool just depress and release the On/off Switch.
5. VARIAblE SPEED CONTROl (See fig. E)
Adjust the variable speed control to increase or
decrease the speed according to the material and
accessory to be used (also possible during no load
operation). Low speed will provide low torque and high
speed gives higher torque.
6. fORWARD AND REVERSE ROTATION CONTROl
(See fig. f)
For drilling use forward rotation marked " L " (lever is
moved to the left). Only use reverse rotation marked
" R " (lever is moved to the right) to release a jammed
drill bit.
NOTE: Never move the forward/reverse switch
whilst the drill in operation or the On/off Switch
is locked as this will damage the drill.
7. HAMMER OR DRIllING CONTROl (See fig. G)
When drilling masonry and concrete choose the
hammer position "
plastic, choose the drill position "
" . When drilling in wood, metal,
" .
WX314