GENERAL POWER TOOL suitable for outdoor use reduces the risk of electric shock. SAFETY WARNINGS f) If operating a power tool in a damp location is unavoidable, use a residual WARNING: Read all safety warnings current device (RCD) protected and all instructions. Failure to follow supply.
ADDITIONAL SAFETY 4) Power tool use and care a) Do not force the power tool. Use POINTS FOR YOUR DRILL the correct power tool for your 1. Wear ear protectors with impact application. The correct power tool will drills. Exposure to noise can cause do the job better and safer at the rate for hearing loss.
Page 5
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear eye protection Wear ear protection Wear dust mask Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Page 6
5. SWITCH LOCK ON BUTTON 6. VARIABLE SPEED CONTROL 7. ON/OFF SWITCH 8. AUXILIARY HANDLE 9. KEYLESS CHUCK (WX312.1 WX313) * Not all the accessories illustrated or described are included in standard delivery. Impact drill WX3 12 WX3 12 .1 WX3 13...
TECHNICAL DATA Type WX312 WX312.1 WX313 (300-329-designation of machinery, representative of impact drill) WX312 WX312.1 WX313 Voltage 230-240V~50Hz Power input 810W 701W No load speed 0-2800/min Impact rate 0-44800/min Chuck capacity 13mm Masonry 16mm Drilling capacity Wood 32mm Steel 13mm...
Page 8
Auxiliary handle Depth gauge Chuck key (WX312) HSS drill bit: 5,6,8mm (Each 1pc WX312.1) Masonry drill bit: 6,8,10mm (Each 1pc WX312.1) We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake.
Remove key and replace in storage tab at base of drill handle. (See Fig. C1) KEYLESS CHUCK (9) (WX312.1 WX313) To open the chuck jaws rotate the front section of the chuck while holding the rear section. Insert the drill bit between the chuck jaws and rotate the front section in the opposite direction while holding the rear section.
Page 10
tool just depress and release the on/off switch. 6. VARIABLE SPEED CONTROL (See Fig. E) Adjust the variable speed control to increase or decrease the speed according to the material and accessory to be used (also possible during no load operation).
MAINTENANCE PLUG REPLACEMENT (UK & IRELAND ONLY) Remove the plug from the socket before carrying out any adjustment, servicing or If you need to replace the fitted plug then maintenance. follow the instructions below. Your power tool requires no additional lubrication or maintenance.
Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UK Declare that the product, Description WORX Impact drill Type WX312 WX312.1 WX313 (300-329-designation of machinery, representative of impact drill) Function Boring holes in various materials Complies with the following Directives,...