Worx WX317 Safety And Operating Manual
Hide thumbs
Also See for WX317:
- Original instructions manual (77 pages) ,
- Manual (10 pages) ,
- Instruction manual (77 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Worx WX317
Summary of Contents for Worx WX317
- Page 1 SAFETY AND OPERATING MANUAL Impact drill WX317 WX318...
-
Page 5: Technical Data
Do not operate power tools in explosive atmospheres, such as in the presence of Type wx317 wx318 (300-329-designation of flammable liquids, gases or dust. Power tools machinery, representative of impact Drill) create sparks which may ignite the dust or fumes. - Page 6 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. RCM marking g) use the power tool, accessories and tool bits etc. in accordance with these Impact drill WX317 WX318...
-
Page 7: Assembly And Operation
If your power tool becomes too hot, set the speed to maximum The machine is intended for impact drilling in brick, and run no load for 2-3 minutes to cool the motor. concrete and stone as well as for drilling in wood, metal and plastic. Impact drill WX317 WX318... -
Page 8: Maintenance
Check that the drill is set to forward rotation for normal use. 3. If a fault can not be rectified, return the tool to an authorized dealer for repair www.worx.com Copyright © 2015, Positec. All Rights Reserved. AR01018601...