76
Vision Series 5 Controller User Manual
6.2.8
Search screen
The search screen will allow the job to be started or continued from any location in the job.
This feature can be accessed when a job is loaded or if a job is stopped while running.
When a job is loaded or stopped, press the search button.
Pressing the next or previous button in search to shape will move the tool forward or backwards one
object at a time in the job.
Pressing the next or previous button in search to point will move the tool forward or backwards one point
at a time in the job.
Use the jog buttons to move the tool close to where you would like to restart or resume the job from.
© 2019 Vision Engraving Systems