Comdial DSU II Manual page 37

DSU II Digital Telephone System
Exclusive Hold
Exclusive hold prohibits a held call from being retrieved by any other station. The
exclusive hold condition also links the held call to the timed hold recall timeout feature.
After timeout, the system causes audible and visual signaling to occur reverts the
exclusive hold condition to a normal line hold condition.
Exclusive Hold System-Wide Enable/Disable
This feature allows programmers to use system class of service programming to enable or
disable exclusive hold capability on a system-wide basis.
Manual Hold
A button activated feature at each station will place an outside line on hold. When a user
presses the HOLD button while on a call, the system places the call on hold, provides a
distinctive flash rate of the line button indicator, and allows the user to access other
station features. A user at the holding station or at any other station that has access to the
line can retrieve the held call.
Timed Hold Recall
After a call has been on hold for a programmed length of time the system will re-call the
station that placed the call on hold. The programmer sets the timed hold recall time
period using system class of service programming.
I
I Hold And I Use Indications
The light associated with a line button provides a visual indication of the status of that
line. When a station user has a line in-use or on-hold at a station, the light indication
provided at that station is of a different color than the indication provided at the other
stations in the system. No class of service programming is required.
Digital Telephone System Features A – 37
IMI66–132