Storage - Toro Wheel Horse 79375 Operator's Manual

1
Figure 28
1. Belt tension indicator (2)
2. Belt tension adjustment
knob

Storage

1. Before long term storage wash the machine with
mild detergent and water to remove dirt and
grime from the entire machine.
2. Check the condition of the drive belt.
3. Check gearcase lubrication level; refer to
Greasing and Lubrication, page 17.
4. Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged or
defective.
5. Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service
Dealer.
6. Store the tiller in a clean, dry garage or storage
area. Cover the tiller to protect it and keep it
clean.
2
4
3
m–3643
3. Seating position for belt
tension release arm
4. Belt tension released
Maintenance
19