Frequency Inverter Setup - Dantherm DanX XWPRS Series User Manual

4. COMMISSIONING

4.2.3 Frequency inverter setup

All frequency inverter parameters are set by the factory. For a list of parameters please refer
to chapter 8. For change of settings of the most important parameters, please refer to the
Danfoss Quick Menu booklet.
The display of the inverter I divided into four functional sections:
(A) Alphanumeric display:
(B) Menu key:
(C) Navigation key and indicator lights
(D) Operation keys and indicator lights
1. Parameter number und name
2. Parameter value
3. Active set up number
4. Motor running direction
5. Use the MENU key to select one of the three menus
6. Not used in DanX
7. Inverter working LED
8. Warning LED
9. Alarm LED
10. Moving one step back
11. Manoeuvring between parameters
12. Selecting and accepting parameters
13. Hand on enables the control over the inverter over the panel
14. Stops the motor
15. Inverter is controlled by the DanX controller
21