Modules Side By Side - Dantherm DanX XWPRS Series User Manual

3. INSTALLATION

3.2.1 Modules side by side

After placing all bottom modules in the right order on the floor, the modules must be
assembled. If the unit includes halve height modules, install the bottom modules before the
top modules.
Follow these steps for mounting the modules:
•
Adjust the height of the modules with the adjustable feet, so that all modules are in level
and in same height.
•
Use straps (1) to move the modules the last few millimetres. Straps should only be
mounted at the bottom or/and top of the modules.
•
Connect neighbour modules by pushing assembly rails (2) from the top over the outside
of the frame profile all the way around the unit. The assembly rail can at difficult
accessible space be divided into smaller pieces, which are then mounted in the same
way.
•
To finish the installation all modules must be connected with the green/yellow earth
connection (3) at the top of the modules.
2
8
1
3