Water Cooled Condenser - Dantherm DanX XWPRS Series User Manual

3. INSTALLATION

3.3.11 Water cooled condenser

The heat pump in a DanX XWPRS swimming pool unit may be fitted with a water-cooled
condenser for transfer of surplus heat, which is not used for heating the return/supply air, to
the pool or sanitary water. The drawing below shows Dantherm's suggestion on how to
connect the water cooled condenser to the swimming pools water supply.
1.
2.
3.
4.
5.
6.
7.
8.
10.
13.
14.
15.
NB!
Piping material must be suitable for chlorine water.
Please be aware of the specified max. water volume (see table below), as a to high water
velocity can destroy the water cooled condenser and cooling circuit of the DanX unit.
XWPRSS
Max water L/h
Main pump for pool water
Temperature sensor pool water (separate water temperature control)
Manual shut down valve
Pump for water cooled condenser (control signal from DanX control panel)
Water consumption gauge
Regulation valve
Temperature sensor (separate water temperature control with on/off signal to DanX
control panel)
3 way valve (separate water temperature control)
Temperature gauge
Air release valve
Non return valve
Separate heat exchanger for pre heating sanitary water
2/4 3/6
800 1250
5/10 7/14
1900 2750
16
9/18 12/24 16/32
2750 5300 5300