Table of Contents
Advertisement
Section 5 - Maintenance
5.
Bend the three tabs down into the grooves.
a
b
Bravo Three
1.
Liberally coat the propeller shaft spline with one of the following Quicksilver lubricants.
Tube Ref No.
Special Lubricant 101
34
2-4-C Marine Lubricant
95
with Teflon
2-4-C Marine Lubricant
95
with Teflon
NOTE: Anti‑corrosion grease is for saltwater applications only.
2.
Slide the forward thrust hub onto the propeller shaft with the tapered side toward the propeller hub.
3.
Align splines and place front propeller on propeller shaft.
4.
Install the front propeller locknut and torque using the Propeller Nut Tool.
Propeller Nut Tool
Description
Bravo Three front propeller nut
5.
Slide the aft thrust hub onto the propeller shaft with the tapered side toward the propeller hub.
6.
Align the splines and install the aft propeller.
7.
Install the propeller nut and torque.
NOTE: The propeller torque stated is a minimum torque value.
Description
Bravo Three rear propeller nut
Page 108
c
a -
Prop
b -
Tab washer
d
c -
Drive sleeve adapter
d -
Tab bent down
e -
Propeller nut
e
4750
Description
Aids in the removal and installation of the front propeller nut.
10677
Where Used
Propeller shaft splines
Propeller shaft splines
Propeller shaft splines
91‑805457T 1
Nm
136
Nm
81
90-8M0057081
Part No.
92-802865Q02
92-802859A 1
92-802859A 1
lb–in.
lb–ft
–
100
lb–in.
lb–ft
–
60
MARCH 2011
eng
Advertisement
Table of Contents
