Fundamentals For Safe Operation; Remaining Dangers, Remaining Risks; Regular Safety Inspections; Modifications And Alterations To The Machine - Bomag BW 100 AD-5 Operating & Maintenance Instructions

Concerning your safety – Fundamentals for safe operation
3.3

Fundamentals for safe operation

3.3.1

Remaining dangers, remaining risks

3.3.2

Regular safety inspections

3.3.3

Modifications and alterations to the machine

Despite careful work and compliance with
standards and regulations it cannot be ruled
out that further dangers may arise when
working with and handling the machine.
Both the machine as well as all other system
components comply with the currently valid
safety regulations. Nevertheless, remaining
risks cannot be ruled out completely, even
when using the machine for the purpose it is
intended for and following all information given
in the operating instructions.
A remaining risk can also not be excluded
beyond the actual danger zone of the machine.
Persons remaining in this area must pay partic-
ular attention to the machine, so that they can
react immediately in case of a possible mal-
function, an incident or failure etc.
All persons remaining in the area of the
machine must be informed about the dangers
that arise from the operation of the machine.
Have the machine inspected by an expert /
qualified person as required for the conditions
the machine is working under, but at least once
every year.
Unauthorized changes to the machine are pro-
hibited for safety reasons.
Original parts and accessories have been spe-
cially designed for this machine.
BW 100 AD-5 27