Setting The Speaker Setting - Pioneer AVH-P5700DVD Operation Manual

(_D_i_g_it_a_I_S_ig_n_a_I_P_ro_c_e_s_so_r_~)
Section
(~---~).
3 Touch MUSIC and then touch ADJUST.
• You can ope rate ADJUST on Iy when MUSIC
has been selected.
4
Touch .. or
T
to select PANORAMA (pa-
norama).
Each time you touch .. or T selects the item
in the following order:
PANORAMA (panorama)-DIMENSION (di-
mension)-CENTER WDT (center width)
5
Touch
~
to turn the panorama control
on.
• To turn the panorama control off, touch
~,
6 Touch T and then touch
~
or
~
to ad-
just front/surround speaker balance.
Each time you touch
~
or
~
it moves the
sound towards the front or the surrounds.
+3 - -3 is displayed as the front"surround
speaker balance moves from front to sur-
rounds.
7 Touch T and then touch
~
or
~
to ad-
just the center image.
Each time you touch
~
or
~
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0-7.
3 is the default and it's recommended for
most recordings. 0 places all center sound in
the center speaker. 7 places all center sound
equally in the left/right speakers.
0
Setting the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to LARGE (large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select SMALL (small).
• Low frequency range is not output if the
subwoofer is set to OFF and the front and
rear speakers set to SMALL or OFF.
• It is imperative that non-installed speakers
be set to OFF.
• Set the front or rear speaker to LARGE if
the speaker is capable of reproducing bass
content, or if no subwoofer is installed,
1 Touch NEXT on the DSP function menu.
2 Touch SP SET.
3 Touch .. or T to select the speaker to
be adjusted.
Each time you touch .. or T selects the speak-
er in the following order:
FRONT (front speakers)-CENTER (center
speaker)-REAR (rear speakers)
-SUB WOOFER (subwoofer)-PHASE (sub-
woofer setting)
• You can switch to PHASE only when the sub-
woofer has been set to ON.
4 Touch
~
or
~
to select the correct size
for the selected speaker.
Each time you touch
~
or
~
selects the size in
the following order:
OFF (off)-SMALL (small)-LARGE (large)
• You cannot select OFF, when FRONT (front
speakers) have been selected.
• You can select ON or OFF, when
SUB WOOFER (subwoofer) has been selected.
• You can switch REVERSE (reverse phase) or
NORMAL (normal phase), when PHASE (subwoo-
fer setting) has been selected.
En
GD