Opening And Closing The Lcd Panel - Pioneer AVH-P5700DVD Operation Manual

( Basic Operations
)
Section
C~
) .
gNote
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
0
Opening and closing the
LCD panel
The LCD panel will be opened or closed auto-
matically with the turning of the ignition
switch on or off. You can turn off the automatic
close/open function. (Refer to page 94.)
• Do not close the LCD panel with hands by
force. That cause malfunction.
• The automatic close/open function will op-
erate the display as follows.
- When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
- When the ignition switch is turned ON
again (or turned to ACC), the LCD panel
will be opened automatically.
- Removing or attaching the front panel
will automatically close or open the LCD
panel. (Refer to page 23.)
• When the ignition switch is turned OFF
after the LCD panel has been closed, turn-
ing the ignition switch ON again (orturning
it to ACC) will not open the LCD panel. In
this case, press OPEN/CLOSE to open the
LCD panel.
• When closing the LCD panel, check to
make sure that it has closed completely. If
the LCD panel has stopped halfway, leaving
it like this could result in damage.
• Press OPENICLOSE to open the LCD
panel.
• To close the LCD panel. press OPEN/CLOSE
again.
Adjusting the LCD panel angle
Q
Important
• If you can hearthe LCD panel knocking
against your vehicle's console or dashboard,
press ANGLE (-) to move the LCD panel a lit-
tle forward.
• When adjusting the LCD panel angle, be sure
to press ANGLE (+/-). Forcibly adjusting the
LCD panel by hand may damage it.
• Press ANGLE (+/-) to adjust the LCD
panel to an easily viewable angle.
The LCD panel angle continues changing as
long as you press ANGLE (+/-) and hold.
• The adjusted LCD panel angle will be memor-
ized and automatically returned to the next time
the LCD panel is opened.
Turning the LCD panel horizontal
When the LCD panel is upright and it hinders
the operation of the air conditioner, the panel
can be turned horizontal temporarily.
• Press FLIP DOWN to turn the LCD panel
horizontal.
• To return to original position, press
FLIP DOWN again.
• The LCD panel returns to the original position
automatically with beeping sound 10 seconds
after operation.
0
En
ill)