Changing The Wide Screen Mode; Adjusting The Picture Adjustment - Pioneer AVH-P5700DVD Operation Manual

Section
ID
C
Basic Operations
)
C"- )
Changing the wide screen
mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 one.
• Press WIDE to select the desired set-
ting.
Press WIDE repeated Iy to switch between the
following settings:
FULL (full)-JUST Uust)-CINEMA (cinema)
-ZOOM (zoom)-NORMAL (normal)
• When a Pioneer navigation unit is connected
to this unit, press WIDE and hold to select the de-
sired setting. Press and hold WIDE repeatedly to
switch between the settings.
FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, giving you a 4:31V picture (normal pic-
ture) without any omissions.
JUST (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizontally
to the ends, enabling you to enjoy a 4:3 picture
without sensing any disparity even on a wide
screen,
CINEMA (cinema)
The picture is enlarged by the same proportion as
FUll or ZOOM in the horizontal direction and by
an intermediate proportion between FULL and
ZOOM in the vertical direction; ideal for a cine-
ma-sized picture (wide screen picture) where cap-
tions lie outside.
ZOOM (zoom)
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cine-
ma-sized picture (wide screen picture).
@
En
NORMAL (normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
a
Notes
• Different settings can be memorized for each
video source,
• When video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear different.
• Remember that using the wide mode feature
of this system for commercial or public view-
ing purposes may constitute an infringement
on the author's rights protected by the Copy-
right Law.
• Video will appear grainy when viewed in
CINEMA or ZOOM mode.
• The navigation map and the rear view camera
picture is always FULL.
~
Adjusting the picture
adjustment
You can adjust BRIGHT (brightness),
CONTRAST (contrast), COLOR (color) and
HUE (hue) for each source and rear view cam-
era,
• The adjustments of BRIGHT and
CONTRAST are stored separately for light
ambient (daytime) and dark ambient (night-
time). A sun
~,:
or moon.) is displayed to
the left of BRIGHT and CONTRAST, respec-
tively, as the ambient light sensor deter-
mines brightness or darkness.
• You cannot adjust COLOR or HUE for the
audio source,
1 Press V.ADJ and hold to display
PICTURE ADJUST.
Press V.ADJ until PlaURE ADJUST appears
in the display,