Changing Audio Language During Playback - Pioneer AVH-P5700DVD Operation Manual

In-dash touchsreen 6.5" lcd multimedia unit dvd/cd receiver with built-in 6.5" touchscreen display
Hide thumbs Also See for AVH-P5700DVD:
Table of Contents

Advertisement

( Playing DVD
video discs)
Section
C~
~)m
audio recordings, you can switch between lan-
guages/audio systems during playback.
• To select 1 hour 11 minutes, convert the
time into 71 minutes 00 seconds and touch
7, 1,0
and
0
in that order.
• To cancel the inputted numbers, touch C.
5
While the inputted number is dis-
played, touch ENTER.
This starts playback from the selected scene.
DNotes
With discs featuring a menu, you can also
touch
MENU
or
TOP.M
and then make selec-
tions from the displayed menu.
With some discs, the icon
6) may be dis-
played, indicating that titles, chapters and
time cannot be specified.
Specifying title
You can use the direct search function to
search for a desired scene by specifying a title.
1
Touch
-+
until10key appears in the dis-
play.
2
Touch 1Okey.
3
Touch 0-9 corresponding to a desired
title number when the disc is stopped.
Title number is displayed for eight seconds
and playback starts from the selected title.
• To select 3, touch 3.
• To select 10, touch 1 and 0 in that order,
• To select 23, touch 2 and 3 in that order.
~
Changing audio language
during playback (Multi..audio)
DVDs can provide audio playback with differ-
ent languages and different systems (Dolby Di-
gital, DTS etc.). With DVDs featuring multi-
1
Touch
-+
until AUDIO appears in the
display.
2
Touch AUDIO during playback.
Each time you touch AUDIO it switches be-
tween audio systems.
DNotes
• The number in the (i))) mark on a DVD's pack-
age indicates the number of recorded lan-
guages/audio systems.
• With some DVDs, switching between lan-
guages/audio systems may only be possible
using a menu display.
• You can also switch between languages/audio
systems using
DVD SETUP. For details, refer
to Setting the audio language on page 86.
Only digital output of DTS audio is possible. If
this unit's optical digital outputs are not con-
nected, DTS audio will not be output, so select
an audio setting other than DTS.
Display indications such as
Dolby 0 and
5.1ch
indicate the audio system recorded on
the DVD. Depending on the setting, playback
may not be with the same audio system as
that indicated.
• Touching AUDIO during fast forward/fast re-
verse, pause or slow motion playback returns
you to normal playback. (!J
...
:!!
aI
'<
_ .
::s
U2
C
< c
:5.
a.
lD
o
a.
iii'
t'\
II'
En
®

Advertisement

Table of Contents
loading

Table of Contents