(~O_t_h_er_F_u_n_c_ti_o_ns
~)
Section
(~
~)GJ
Introduction of setup
adjustments
G) Setup menu display
Shows the setup function names.
•
Press A.MENU button and touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
• To return to the previous display, touch BACK.
• To return to the display of each source, touch
ESC.
o
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
0
Setting the AV input
You can switch the setting according to the
connected component.
• Select VIDEO to watch video of a con-
nected component as AV source.
• Select M-DVD to watch video of a con-
nected DVD player as S-DVD source.
• Select EXT-V to watch video of a connected
video unit as EXT source.
•
Touch AV IN on the setup menu to se-
lect the AV input setting.
Touch AV IN until the desired setting appears
in the display.
• OFF - No video component is connected
• VIDEO -
External video component (such
as portable video player)
• M-DVD -
Multi-DVD player connected with
RCA cable
• EXT-V -
External video unit (such as Pio-
neer products available in the future)
•
When a multi-DVD player is connected with
an AV-BUS cable, do not select
M-DVD
otherwise
no pictu re wi II be displayed even if you select
S-DVD.0
Setting for rear view camera
A
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
This unit features a function that automatically
switches to the rear view camera video (REAR
VIEW CAMERA IN jack) when a rear view
camera is installed on your vehicle. When the
gear shift is in REVERSE (R) position, the
video automatically switches to a rear view
camera video. (For more details, consult your
dealer.)
• Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to RE-
VERSE (R) from another position.
• When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
• To return to the source display, press
V.ADJ.
1
Touch B-CAM on the setup menu.
o
....
:r
ID
...
"TI
I:
:::J
a
o
:::J
'"
En
®