Section
ID
(Initial Settings
) (~----~)
• When the navigation unit or AVG-VDP1 is
connected to this unit, you cannot operate
this function.
•
Touch ILM SW on the initial menu to
turn the illumination switch on.
Set the illumination switch ON to have the illu-
mination of this unit remain on when the igni-
tion key is turned to the
ACC
position. Set to
OFF
to have the illumination off when the igni-
tion key is turned to the
ACC
position.
• To turn the illumination switch
otf.
touch
ILM
SW again.
ONate
Never set the illumination switch on if the vehicle
does not have the ACC position. It may cause bat-
tery leakage.
G
(92)
En