Setting The Rear Speaker Lead; Setting The Subwoofer Controller - Pioneer AVH-P7480DVD Owner's Manual

Setting the Rear Speaker Lead

This product's rear speaker leads can be used for full-range speaker ("Full Range") or
Subwoofer ("Sub Woofer") connection. If you switch Rear Speaker Lead setting to the "Sub
Woofer", you can connect a rear speaker lead directly to a Subwoofer without using an auxil-
iary amp.
Initially, the unit is set for rear full-range speaker connection ("Full Range").
1. Check to see "Full Range" is currently
highlighted.
If not, select that option by moving the joystick.
"Full Range" is highlighted in green.
2. Click the joystick.
Each click toggles Full Range/Sub Woofer.
Note:
• When no Subwoofer is connected to the rear speaker lead, select "Full Range".
• When a Subwoofer is connected to the rear speaker lead, set for Subwoofer "Sub Woofer".
• Even if you change to "Sub Woofer", there is no output unless you switch the Subwoofer
Output (see page 98) in the Audio Menu ON.

Setting the Subwoofer Controller

When rear speaker leads are connected to full range speakers (when "Full Range" is selected),
you can connect the RCA Subwoofer output to a Subwoofer. In this case, you can select
whether to use the Subwoofer controller's (Low Pass Filter, Phase) built-in "Internal" or the
auxiliary "External".
1. Select "Internal" by moving the joystick.
"Internal" is highlighted in green.
2. Click the joystick.
Each click toggles Internal/External.
Note:
• When the Rear Speaker Lead setting is "Sub Woofer", you cannot change the Subwoofer con-
troller.
• If you change the Subwoofer Controller, Subwoofer output and Non Fading output in the
Audio Menu return to the factory settings.
• Even if you change this setting, there is no output unless you switch the Non Fading Output
(see page 97) or Subwoofer Output (see page 98) in the Audio Menu ON.
102