fantastic furniture REED Series Manual page 6

Step 3
You will need
Phillips head
16X Screw
screwdriver
(H1)
Fix Top and Bottom Panels (P3+P4), Base Pane (P7) and Fixed Shelves (P5x2) to
to Side Panel (P1) by tightening with Screws (H1).
Repeat for Side Panel (P2).
Step 4
You will need
8X
40X Nail
(H9)
Phillips head
screwdriver
Fix Back Panel(P8) to assembled unit using Nails(H9).
Fix Back Panel (P8) to Fixed Shelves (P5x2) using Screws (H10).
*Ensure the predrilled screw holes line up with the Fixed Shelf Panels (P5x2) before
fixing Back Panel.
www.fantasticfurniture.com.au
Ensure the pre-drilled hole
on top panel is facing
upwards on the outside
of the unit
(H1)
Ensure the raw edge
of back panel is facing
outwards
Screw
(H10)
Hammer
Pre-drilled guide
holes for
Screw(H10)
(P3)
(P5)
(P1)
(P2)
Ensure the raw edges of the
shelves are facing towards
the back of the unit"
(P5)
(P4)
(P7)
(H9)
(H10)
(P8)
(P8)
PAGE 6