Technical Specifications - Vivotek NetworKam IP2111 User Manual

C. Technical specifications
Remote Management
Configuration and system log can be accessed
via Web browser and FTP application remotely.
Networking
Protocol
TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS and DHCP
Modem
PPP(dial-up, direct cable connection)
Physical
10baseT Ethernet or 100baseT Fast Ethernet
Video
Algorithm Supported
MJPEG
Features
Adjustable image size and quality
Time stamp and text overlay
Resolution
NTSC(IP2111)
Up to 30 frames at 176x120
Up to 30 frames at 352X240
Up to 10 frames at 704X480
PAL(IP2121)
Up to 25 frames at 176x144
Up to 25 frames at 352X288
Up to 10 frames at 704X576
Camera Specification
1/3 inch color CCD
512(H) x 492(V)(NTSC) / 512(H) x 582(V)(PAL)
1 Lux / F2.0
AGC, AWB, AI/AES
Electronic shutter:
1/60 (1/50) to 1/100,000 sec.
Standard C or CS mount lens fitting
General I/O
1 opto-isolated sensor inputs (max. 12VDC 50mA)
1 output relays (max. 24VDC 1A, 125VAC 0.5A)
Alarm Features
Motion detection with percentage and sensitivity
Daily repeat timing schedule
3 color images per camera for pre/post alarm image storage
Automatic transfer of stored images via email or FTP with event-
triggered actions
RS232/RS485
9 pin D-SUB RS232 or RS485 max.115.2Kbps
PAN/TILT
PT positioning device control through RS232 or RS485
Clear-data command driver is supported
Remote Software Upgrade
System firmware upgradeable via FTP
Security
Administrator and user group protected
15 digits password protection
Demo account with limitation by administrator
Optional Software
Record and play pictures on PC hard disk
I/O ports monitoring feature
LED Indicator
Heartbeat indicator
Status indicators
Network indicator
Power
12V DC, 1.2A external power supply
Viewing System Requirement
Protocol
Standard internet TCP/IP suite
Operating System
Microsoft Windows, Linux, Unix and Mac OS
Browser
Internet Explorer 4.x or above,
Netscape Navigator 4.x or above
93
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097