Vivotek IP32133 User Manual
Vivotek IP32133 User Manual

Vivotek IP32133 User Manual

Vivotek user manual network camera ip32133
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP32133 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vivotek IP32133

  • Page 2: Before You Use

    Commands of Network Camera" will be a very helpful reference to customize existing homepages or integrating with current web server. Those paragraphs preceded by Ignoring the warnings may result in serious hazards. erroneous configuration, should be fully understood and cautioned. - 1 - refer appendix www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 3: Table Of Contents

    Build a security application...33 Software revision upgrade ...36 Definition of Configuration ... 37 System parameters...38 User group administration...39 Network settings...40 General...40 HTTP ...40 Streaming ...41 WLAN C onfiguration...41 Mail & FTP settings...43 SMTP...43 - 2 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 4 System resource URL...58 General format of command URL...59 System configuration URL...59 Security configuration URL...60 Network configuration URL ...61 Mail&FTP configuration URL ...63 Video configuration URL ...64 Image quality configuration URL...66 Application configuration URL...67 - 3 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 5 Homepage layout configuration URL...68 D. Technical specifications...69 - 4 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 6: Package Contents

    Package Contents Network C amera IP3133 Power adapter C amera stand Software C D Quick installation guide Warranty card - 5 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 7: Installation

    5 that cannot exceed 100 meters. C onnect the jack of the power adapter MiniAVServer prior to plugging the utility end into the utility power socket. It will reduce accidental electric surge shock. - 5 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 8 INPUT (Initial state of DI is low) INPUT (Max. 50mA, 12VDC) SW_COMMON OUTPUT (open from SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) - 7 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 9: Software Installation

    If there is no DHC P server, administrators choose neighbor address PC . Installer program will check the IP address automatically; there will warning message if it conflicts with - 8 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 10 If administrators want to use another IP address, modify the IP address text field. - 9 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 11 The connection mode, SSID, WEP settings are required. If the settings are not sure at this stage, click “Skip” to continue installation in Ethernet. All the settings can be entered later from page. - 10 - configuration www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 12 After clicking on “Save”, a progressive will indicate process. in the successful Administrators may click directly newly installed server default browser. - 11 - installation to access the in the www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 13 FTP server port in the network settings. Otherwise refer to Appendix A Troubleshooting to restore factory default settings and then use the installer to install again. - 12 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 14: First Access To Network Camera

    There is no way to discover administrator’s password. If the password is forgotten, only restoring factory defaults can help. - 13 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 15: How To Use

    In the figure, the foreground is the login window and the background shows the message when authentication fails. The user may check the option to save the password for future convenience. - 14 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 16: Installing Plug-In

    Users may click on proceed. If the web browser does not allow the user to install, check the Internet security option to lower security levels or contact network supervisors. - 15 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 17: Primary User's Capability

    C lick on the configuration link to the right of the image window to enter the configuration page. - 16 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 18: Connection Type

    - UDP, TCP and HTTP. With UDP protocol, audio and video streams can be more real-time. But some packets may be lost due to network burst traffic and images will be obscure. If TCP protocol is selected, packet loss would not occur and video - 17 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 19 UDP manually to save and then return HOME to connect again. <url> http://<Network Camera>/protocol.html <Network C amera> is the domain name or original IP address of Network C amera. - 18 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 20: Administrator's Capability

    20 and 25 or 30 frames per second. If your network bandwidth is below 384 Kbps, you should fix the bit rate according to your - 19 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 21 Otherwise fix the bandwidth according to your actual network speed and set the frame rate to 30. If the images look bad, select the lower frame rate above 15. If the images are not improved, select the lower bandwidth. - 20 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 22: Open Accounts For Users

    Administrators can also decide if more viewers are allowed to watch the video if the viewers exceed the limit. The overloaded viewers will have snapshot mode instead. to enable protection. This password is ○ - 21 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 23: Change Homepage Layout

    Change homepage layout How to change the subject text of hom epage 1. C lick on “C onfiguration” on homepage, 2. C hange the text in “Host name”, 3. C lick on “Save” button. - 22 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 24 4. Find “Background color” and pull down the list to choose any color you like, 5. C lick on “Save” button. * The background color is better to contrast with the font. - 23 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 25 6. Open an FTP client program and connect to Network C amera. The user name and password is as same as the administrator’s. 7. Transfer wallppr.jpg in local folder to Network C amera, 8. C lose the FTP program and reload the homepage of Network C amera. - 24 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 26 5. C lick on “Save” button. If you want to change the default logo stored in Network C amera, 3. Find “Logo graph” and choose “default”, 4. C lick on “Save” button, - 25 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 27 8. C lose the FTP program and reload the homepage of Network C amera. If you want to add hyperlink to the logo image, 3. Find “Logo link” and type the hyperlink in the edit box, for example, http://www.yahoo.com, 4. C lick on “Save” button. - 26 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 28 <!-- Copy the next bold line to where you want to show the image coming from MiniAVServer. This line is remark only and is hidden on homepage. //--> <OBJEC T ID=VAMC trl></OBJEC T> </p> </body> </html> ****** Example homepage end ****** - 27 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 29 Refer to tutorials of writing HTML and scripts. If the customized homepage goes wrong and cannot display, link to the “Homepage layout” page, “http://<IP address of MiniAVServer>/setup/layout.html”, to disable “Use the customized homepage”. - 28 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 30: Build A Multimedia Web Attraction Site

    3. Go to the page bottom and check “Allow more viewers with snapshot mode”, 4. Set the snapshot interval to refresh the still image automatically. The longer the snapshot interval is, the better the snapshot mode works for more viewers. - 29 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 31 8. Select FTP without date time suffix as the upload method and click on save, 9. The image file uploaded to the web space is named “video.jpg”. C heck if the file is - 30 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 32 Network Camera. Also define the refresh interval according to your network bandwidth for best effect. Too frequent refresh rate for a great deal of visitors may overload Network C amera and retard the response. - 31 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 33 </script> <!-- End of scripts to auto refresh the image. //--> </p> </body> </html>****** Example homepage end ****** //SEC ONDS BETWEEN REFRESH //IMAGE WIDTH //IMAGE HEIGHT src="'+image+'" height="'+imgheight+'" - 32 - //IMAGE URL www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 34: Build A Security Application

    4. C heck the “Event operation”. The trigger condition can be set to detected motion or status of the attached device, 5. Set the delay before detecting next event to avoid continuous false alarms - 33 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 35 14. C lick on “Application” at the left column, 15. C heck the window name set in step 10, 16. C heck “Upload snapshots while motion detected”, - 34 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 36 17. C heck “Send snapshots by email”, 18. C lick on save to validate. If emails with snapshots are preferred, 17. C heck “Send snapshots by email”, 18. C lick on save to validate. - 35 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 37: Software Revision Upgrade

    Software revision upgrade C ustomers can obtain the up-to-date software from Vivotek web site. An easy-to-use Upgrade Wizard is provided to upgrade Network Camera with some clicks. This function is open to administrators only. To upgrade the system, follow the procedures below.
  • Page 38: Definition Of Configuration

    If administrators also want to set certain options through the URL, read the reference appendix for details. <url> http://<Network Camera>/setup/config.html <Network C amera> is the domain name or original IP address of Network C amera. - 37 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 39: System Parameters

    "Time zone", is used to adjust the hour get from timeservers for local settings. Remember to click on accurate time set by manual. to validate changes. The later click on - 38 - , the less www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 40: User Group Administration

    “Snapshot interval” defines the refresh rate of the still image in the homepage seen by overloaded viewers. , the web browser will ask administrators for the new - 39 - to insert the new www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 41: Network Settings

    “Http port”, it can be other than default port 80. Once the port is changed, users must be informed for successful connection. For instance, when the administrator changes the HTTP port of Network C amera whose IP address is 192.168.0.100 from 80 to 8080, - 40 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 42: Streaming

    The default channel setting depends on the installed region. “TX rate”, to select the maximum transmission rate on the network. 22Mbps is the default setting. - 41 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 43 Some invalid settings may cause system failure to respond. C hange the configuration only if necessary and consult with network supervisor or experienced users for correct settings. Once the system is lost contact, refer to Appendix A for reset and restore procedures. - 42 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 44: Mail & Ftp Settings

    Network Camera can automatically attempt for active mode if the external FTP server does not support passive mode. “2nd FTP server”, the domain name or IP address of external FTP server. “2nd FTP user name”, granted user name on the backup FTP server. - 43 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 45 “2nd FTP password”, granted password on the backup FTP server. “2nd FTP remote folder”, granted folder on the backup FTP server. “Secondary FTP passive mode”, passive mode setting for the backup FTP server . - 44 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 46: Video Codec Parameters

    -5 to +5. The user may press the image is O.K., press recall the original settings without changes. to fine-tune the image. When to memorize the image settings. - 45 - can be clicked to www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 47 - 46 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 48: Motion Detection

    Higher sensitivity and small percentage will make motion easier detected. The following figure shows the screen when been outlined in red and the graphic bar goes red since the goldfish is moving. is clicked. The monitoring window has - 47 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 49: Application Setup

    “videopos.jpg” respectively for the snapshots before event, right upon event, and after event. The date and time suffix may be added according to the option. Confirm the external mail or FTP server settings in network configuration. - 48 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 50: Sequential Operation

    JPEG image was captured at 4 minutes and 5 seconds after 3 o’clock, January 1st, A.D. 2002. If the suffix is omitted, the file named “video.jpg” on the external FTP server will be refreshed at the specified interval. - 49 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 51: Homepage Layout Settings

    ”Font color", pull down the list to select any color for the text in the homepage. ”Background color", pull down the list to select any color for the homepage background. It can be seen when the background image is not displayed. - 50 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 52: Viewing System Log

    After confirmation, the system will restart and require the installer program to setup the network. - 51 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 53: Appendix

    Poke the wrench to click on the button. RESTORE: 1. Poke the wrench to press on the button continuously. 2. Wait for self-diagnostic to run twice. 3. Withdraw the wrench as soon as the second self-diagnostic starts. - 52 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 54: Frequently Asked Questions

    Network Camera is connected to the Internet and the function is enabled. Differences of several hours may result from the time zone setting. - 53 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 55 A Too many users requesting the real-time multimedia content will digest the network. To achieve the best effect, Network Camera is designed to accommodate maximum ten users to watch and listen to Network Camera at the same time. It is recommended to - 54 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 56 A Since Network C amera is a "network camera", any incorrect network settings will make it unreachable. Once the system is missed due to wrong configuration, restore the factory default settings following procedures in Appendix A. - 55 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 57: C. Url Commands Of Network Camera

    Network Camera, with IP address of 192.168.0.201, set digital output to connect to NC with C OMMON. Restore factory default settings /setup/restore.cgi Network Camera will automatically restart after restoring - 56 - factory default www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 58: Restart System

    Restart system /setup/reset.cgi Restart Network C amera without warning. - 57 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 59: Page Url

    Administrators may use the following links to show the images saved in Network C amera on another page. Resource name system logo image background image Referenced URL /client.html /setup/config.html /setup/system.html /setup/security.html /setup/network.html /setup/video.html /setup/motion.html /setup/image.html /setup/app.html /setup/layout.html /setup/logfile.html /setup/parafile.html /setup/factory.html Referenced URL /pic/logo.gif /pic/wallppr.jpg - 58 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 60: General Format Of Command Url

    NTP server to synchronize directly adjust date and time year, month and date separated by slash hour, minute and second separated by colon time zone, 8 means GMT +8:00 - 59 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 61: Security Configuration Url

    “open” grant for demo account prohibit for demo account permission for DIDO access prohibit for DIDO access - 60 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 62: Network Configuration Url

    C anada channel in Europe channel in Spain channel in France channel in Japan (all) 1 Mbps transmission rate 2 Mbps transmission rate 5.5 Mbps transmission rate 11 Mbps transmission rate - 61 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 63 128 bits key length 256 bits key length hexadecimal format of key ASC II format of key one of four keys network key 1 network key 2 network key 3 network key 4 - 62 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 64: Mail&Ftp Configuration Url

    FTP server password for primary FTP server upload folder in primary FTP server user name for secondary FTP server password for secondary FTP server upload folder in secondary FTP server - 63 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 65: Video Configuration Url

    1 fps set maximum frame rate to 2 fps set maximum frame rate to 3 fps set maximum frame rate to 5 fps set maximum frame rate to 10 fps - 64 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 66 30 fps synchronize with 50Hz utility synchronize with 60Hz utility auto white balance fixed indoor(2800K) fixed fluorescent 1(3600K) fixed fluorescent 2(4000K) fixed outdoor(6000K) flip image normal image mirror image normal image - 65 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 67: Image Quality Configuration Url

    <not required> DESC RIPTION adjust brightness of image adjust contrast of image adjust hue of image adjust saturation of image not save the parameters recall the original settings save the parameters - 66 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 68: Application Configuration Url

    DO when motion detected upload snapshot when DI condition matched upload snapshot detected seconds interval for sequential mode time to start sequential mode time to stop sequential mode - 67 - trigger trigger trigger condition when motion www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 69: Homepage Layout Configuration Url

    URL of image for logo URL to link when clicking on logo hide background image use default background use image from URL URL of image for background color index for font color index for background - 68 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 70: Led Indicator

    - Viewing system requirement Protocol Standard I nternet T C P /I P s uite Operat ing syst em M ic ros oft Windows Browser I nternet E xplorer 5 .x or above - 69 - www.vivotek.com T: 886-2-22404099 F: 886-2-22404097...
  • Page 71 B of EN55022/1998, and the requirement for immunity according to EN50082-1/1992. Liability Vivotek Inc. cannot be held respons ible for any technical o r typographical errors and reserves the right to make changes to the product and manuals without prior notice. Vivotek Inc. makes no warranty of any kind with regard to the material contained within this document, in cluding, but not limited to, t he implied warranties of merchantability and fitness for a particular purpose.

This manual is also suitable for:

Ip3133

Table of Contents