Preparing The Tablet Controller - Yamaha disklavier IV / Pro Series Maintenance Handbook

5. MKIV/Pro installation manual

5 - 5. Preparing the Tablet Controller

HINT!
1) Set up the cradle.
Tip: Before removing the
battery, move the bat
tery lock to the direction
of an arrow.
Battery charge takes 4 hours
3) Open the cover of the cradle
interface, and then set the Tab
let Controller on the cradle.
Charging starts and the charge
lamp lights in orange.
Adjusting the angle of the
cradle to your preference
Loosen the two screws on the
bottom of the base plate, adjust
the angle, and then tighten
the screws.
MHB23 MKIV/PRO DIOV1.05, SCV.1.01 PAGE.09
North American model only
2) Put the rechargeable battery into the
Tablet Controller.