Preparing To Play - Yamaha 405 Manual

Preparing to play
First, have a go at making the sound of the
flute on the upper keyboard.
Set al] the tone levers, push switches, tablets and sliding controls to the OFF or normal position, as
illustrated in the figure,
Rotate the MASTER VOLUME control to the
right (clockwise).
This control sets the maximum sound level that
will be available from the organ.
Push down the white flute 8' lever which is the seventh
aw" from the left.
Plug the cord into the
Turn on the power switch. The lamp now
power outlet.
lights. i
Note: It takes about 5 seconds for the lamp
to light after the power has been
switched on. This is a normal design
function.
i;
\
E
ki
i]
Can you hear the sound?
expression pedal slightly.
You will note that the farther you
Depress the keys on the upper push the pedal down, the louder
keyboard with your fingers. the sound becomes.
4
RSE OA ERE EE S INT PRONE GEA SPAT se