Prc100 Initial Setting - Yamaha disklavier IV / Pro Series Maintenance Handbook

5. MKIV/Pro installation manual

5 - 12 - 1. PRC100 initial setting

Please wait until each procedure completes,
HINT!
in order to avoid freezing screen
Initial Settings of the Pocket Controller
The following functions are available to control the
Disklavier remotely. Set up a variety of useful functions to
your preference.
Tap on ([PRC-100 Menu] icon) to return to
the [PRC-100 Menu] screen.
[Interface]: Usually utilize this function to control
the Disklavier remotely. The [Main] screen is the top
menu of this function.
[Interface Updater]*: Updates the [Interface].
[Piano Assign]*: (--> Pairing the Pocket
Controller and the Disklavier)
[Service Center]*:
[Light & Power]*: Makes energy conserving
settings.
[Recalibrate]: (See --> Calibrating the Touch Screen
on this page.)
[Date/Time]: (See Setting up the Current Date and
Time below.)
[Network]*: Lists available network services.
[System Info]*: Shows system information
(memory, storage, version).
* For normal use, modification of these setups is not
required.
MHB23 MKIV/PRO DIOV1.05, SCV.1.01 PAGE.16
Calibrating the Touch Screen
The following procedure calibrates the touch screen to
improve the accuracy of the tapping operation.
Tap on [Recalibrate] in the [PRC-
100 Menu] screen, and then firmly
tap on the cross hairs that appear in
sequence one by one.
When the recalibration is completed, the [PRC-100
Menu] screen resumes.