Chassis And Console Cabling; Optional Feature Installation - Raven Viper 4 Installation Manual

Chapter 3

Chassis and Console Cabling

Note:
A console cable is not supplied in kits and will be required to power up and connect the console
with the control or guidance system(s). Contact a local Raven dealer for details on available
console cables and purchasing a cable appropriate for your specific operations.
One of the following cables will be required with the Viper 4 or Viper 4+ field computer:
Available Cabling for Viper 4 or Viper 4+ Field Computers
TABLE 2.
Many existing systems that currently have a Raven field computer installed may be upgraded to the Raven
Viper 4 by using the adapter cable listed above. This adapter cable allows the Viper 4 to replace the existing
field computer without replacing any existing system cables.
For new installations, the Viper 4 generation 2 console cable connects directly to an equipment specific
chassis cable. The generation 2 cabling platform and hitch connection design is well suited for using
Viper consoleswith tractors and various towed implements. This highly modular design allows the operator to
quickly switch the control system for different field operations throughout the growing season.
Optional Cabling and Components
Review the following table for cabling options and other components available for use with the Raven Viper 4.
Contact a local Raven dealer for details or purchasing information.
Viper 4 and Viper 4+ Optional Equipment Cables
TABLE 3.
Note:
Refer to the Raven CANbus Installation Manual for additional cable platform and connection
information.

Optional Feature Installation

Several optional systems and features are available for use with the Raven Viper 4, such as automated
steering, automatic section or row control, product control and automated boom leveling and height control
systems.
Contact a local Raven dealer for a complete list of features compatible with the Viper 4, for additional
information on required hardware, or for purchasing or installation assistance with these optional systems.
22
Description
Cable, Viper 4 Gen 2 Console
Cable, Gen 1 to Viper 4 Adapter
Description
Cable, Anti-vibration Ethernet 6.5' [2 m]
Cable, Anti-vibration Ethernet 13' [4 m]
Cable, DVI Monitor 6' [1.8 m]
Cable, 4 Input Closed Circuit Camera
Cable, 3 Input Auxiliary CANbus
Part Number
115-0172-025
115-0172-023
Part Number
115-0172-090
115-0172-210
115-0172-091
115-0172-077
115-0172-078
Viper® 4 and Viper 4+ Installation Manual