Reclining Headrest - CYBEX SOLUTION M User Manual

g
n
k
d
r
16
f
n
k
t
WARNING! The vehicle belt buckle (l) must never cross the arm rest. If the belt
system is too long, the child car seat is not suitable for use in this position in
the vehicle. In case of doubt, please consult the manufacturer of your vehicle.
5. The lap belt (n) should have been fed through the lower belt guides (k) on both
sides of the seat cushion (d).
Note! Teach your child from the start to always ensure that the belt is tight and, if
necessary, how to tighten the belt themselves.
WARNING! The lap belt (n) must run as low as possible on both sides along
your child's groin to have optimum effect in the event of an accident.
6. Now feed the diagonal belt (f) through the upper belt guide (g) in the headrest (e)
until it is inside the belt guide.
Ensure that the diagonal belt (f) runs between the outside of the shoulder and the
neck of your child. If necessary, adjust the height of the headrest to change the
position of the belt. The height of the headrest (e) can still be adjusted while in the
car.

RECLINING HEADREST

The reclining headrest helps to prevent the child's head from dangerously tipping
forward during sleep. In the event of a collision, the headrest will follow the
movement of your child's head forwards, lock into place and absorb the subsequent
backwards motion of your child's head.
Note! Ensure that your child's head is always in contact with the reclining headrest
(r), as this is the only way that the headrest can provide optimum protection in case
of side collisions.
The recline angle of the headrest can be set to one of three positions. It can be
moved forward without moving the lever to the second or third position until the rest
locks into position. To return it to the original position, the lever must be operated and
the headrest pulled back.
WARNING! Never block the locking mechanism (t) ! In the event of an accident,
the recline adjustment mechanism must move smoothly, or else your child
may be injured!