Safety-Technical Controls - Tens EV-806P Quick User Manual

For safety reasons, review the following checklist before using your EV-806 Digital
TENS/EMS
1. Check the device for external damage.
- deformation of the housing.
- damaged or defective output sockets.
3. Check the usability of accessories.
- patient cable undamaged.
- electrodes undamaged.
- Battery is not corroded
Please consult your distributor if there are any problems with device and accessories.
2
Should any malfunctions occur while using the EV-806 Digital TENS/EMS, check
- whether the parameters are set to the appropriate form of therapy. Adjust the control
correctly.
- whether the cable is correctly connected to the device. The cables should be inserted
completely into the sockets.

SAFETY-TECHNICAL CONTROLS

- whether the LCD reveals the menu. If necessary, insert 4 new AA batteries.
- for possible damage to the cable. Change the cable if any damage is detected.
The EV-806 Digital TENS/EMS devices are in compliance with the following standards:
EN 60601-1-2: 2007 Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance
-Collateral standard: Electromagnetic compatibility -Requirements and tests
EN 60601-1:2006 Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance
MALFUNCTIONS
CONFORMITY TO SAFETY STANDARDS
Telephone: 0800 121 4626 www.thetenscompany.co.uk