Tens EV-806P Quick User Manual page 12

10. Steps to Set a EMS Program
The settings can be adjusted according to the following steps.
f. Turn on the Intensity
After the electrodes are placed firmly on skin and the lead wires are plugged in
the socket of device, turn the on/off control clockwise. The menu will reveal on
LCD. Notice the indication of power and function on the LCD.
g. Select Mode
There are two EMS modes of option, S(Synchronous) or A (Alternate). Select a
mode by pressing the "Mode" control. When an EMS mode is selected, the LCD
shows "EMS" on the top. After a mode is selected, press "SET" control to enter
next setting. You may adjust the setting only when it is flashing. Then press the
"Increment" or "Decrement" control to change the settings.
12
h. Set Ramp Time
ADJUSTING THE CONTROLS FOR EMS
The ramp time controls the time of output current that increase from 0 to the
setting level, and from the setting value to 0. When the ramp time is set, each
contraction may be ramped up and down in order that the signals come on and
come off gradually and smoothly. The ramp time is adjustable from 1 to 8
seconds.
Telephone: 0800 121 4626 www.thetenscompany.co.uk