Tens EV-806P Quick User Manual page 9

3. Mode Control
There are 5 TENS modes(B, N, M, SD1, SD2) and 2 EMS modes (S, A) available. The mode
can be selected by pressing the "Mode" control. When a TENS mode is selected, the LCD
shows "TENS" on the top. When EMS mode is selected, the LCD shows "EMS" on the top.
4. Set Control
By pressing the "Set" control, you may enter the setting you intend to make adjustment.
You may start to set the value by pressing the "Increment" and "Decrement" controls
when the value is flashing.
5. Increment Control
This button controls the increase of settings. When pressing this button, the parameter
will increase.
6. Decrement Control
ADJUSTING THE CONTROLS USING
This button controls the decrease of parameter. When pressing this button, the
parameter will decrease.
THE MANUAL ADJUSTMENT
7. Timer
The unit has a timer of 1-60 minutes and Continuous. It can be adjusted by pressing the
"Set" and "Increment" or "Decrement" controls. The treatment time will countdown
automatically in one minute increments. Its output will be shut off when time is up.
8. Low Battery Indicator
The unit has a timer of 1-60 minutes and Continuous. It can be adjusted by pressing the
"Set" and "Increment" or "Decrement" controls. The treatment time will countdown
automatically in one minute increments. Its output will be shut off when time is up.
www.thetenscompany.co.uk
9
Telephone: 0800 121 4626