Tens EV-806P Quick User Manual page 6

To switch on the device turn either one of the intensity controls at the top
of your unit. Choose the desired programme by pressing the mode button
located as shown in Fig B. As already described the programmes P1-P12
are TENS programmes and P13-P24 are EMS programmes.
You are now ready to use your device. It is recommended to now turn off
the device and connect the patient leads to the sockets as shown in Fig C.
Depending on the condition and treatment area, you may use any number
of electrodes up to a maximum of 4 electrodes and 2 channels.
6
STEP BY STEP GUIDE
Telephone: 0800 121 4626
Fig C
www.thetenscompany.co.uk