Tens EV-806P Quick User Manual page 10

9. Steps to Set a TENS Program
The settings can be adjusted according to the following steps.
a. Turn on the Intensity
After the electrodes are placed firmly on skin and the lead wires are plugged in
the socket of device, turn the on/off control clockwise. The menu will reveal on
LCD. Notice the indication of power and function on the LCD.
b. Select a Mode
Select a mode by pressing the "Mode" control. The mode you selected will
show up on the top of liquid crystal display. There are 5 modes of your option
including –B(Burst), M(Normal), M (Modulation), SD1 and SD2. When a TENS
mode is selected, it shows "TENS" on the top of liquid crystal display.
After a mode is selected, always press "Set" to enter next setting, and press
1
"Increment or "Decrement" to adjust its value.
ADJUSTING THE CONTROLS FOR TENS
c. Set Pulse Width
Pulse Width is adjustable from 50 us to 300 us. Press "SET" control to enter this
menu, then press "Increment" or "Decrement" to adjust the setting. If no
instructions regarding the pulse width are given in therapy, set the control to
the suggested 70-120 us setting.
Telephone: 0800 121 4626 www.thetenscompany.co.uk