Velocitek Prostart Manual page 8

Installation 7
Do not use rounded head screws with the ProStart cradle. Non-countersunk screw heads will interfere
with mounting the ProStart in its cradle.
The ProStart now features a magnetic compass. If you intend to use the magnetic compass feature,
mount the back of the cradle perpendicular to the centerline of the boat. The cradle should be installed
at least 1.0m away from steel, iron, other ferromagnetic metals and permanent magnets.
If you only intend to use the GPS features of the ProStart, the cradle can be installed anywhere on the
boat with a view of the sky.
For instructions on changing the ProStart from magnetic compass to course over ground, see the
Configuration section on page 20.
Several mounting options are available for the ProStart. For details, go to
https://www.velocitek.com/collections/accessories.