Start Mode; Timer; Distance To Line; Start Line Pacing Guides - Velocitek Prostart Manual

Start Mode

Start Mode
Indicator

Timer

Display
Indicator
Distance-
to-line
Display
Indicator
Start mode combines a timer and perpendicular distance to line display to provide the information
necessary for a perfect start at the gun.
The semi-circles next to the
are set a line appears between them to illustrate that the line is set.
Timer
The count-down timer displayed as mm:ss. The time can be set from 1:00 to 15:00.

Distance To Line

'Distance To Line' is the perpendicular distance to the user defined line. Refer to Set Start Line on page
18 for detailed information on setting the start line. 'Distance To Line' is displayed in meters. A negative
'Distance To Line' means that the boat is over the line. Three hyphens '---' are displayed when the line is
not defined and a GPS signal is available. When the 'Distance To Line' is larger than 1000 meters '>999' is
displayed.

Start line pacing guides

In the final minute of the countdown the bar graph segments will display 'Pacing Guides,' giving you an
indication of whether you are on track to be early or late to the line given your current boat speed and
heading. Below is a description of how this algorithm works so that you can employ this feature in your
starts with confidence.
PIN and RC buttons indicate if the respective ends are set. When both ends
Distance
Modes 11
Timer
Line is Set
Line End
Set
Indicator